- Free click and collect
- Finance your purchase
Features dynafit speed turn 2.0
The evolution of the legendary and well-known Speed binding from Dynafit improved once again, the 2.0. This new version is an even greater communion between the previous model of the Speed and the Speed Radical, without a doubt with the improvements the Speed Turn 2.0 will continue to be one of the most used bindings among mountain skiers.
The heel of the binding allows an adjustment of +/- 12.5 mm, when the speed model allowed 4 mm. This is very useful if you change boots, since it will not be necessary to disassemble and reassemble the binding. The rise remains the same as previous Speed models to keep the binding light.
The toe box is somewhat wider than the speed, and incorporates in the 2.0 the screw drawing system of the radical series, going from 5 to 4 and adding the aluminum base instead of plastic, continues with the improved excenter for that is easier to handle when locking and unlocking and is mounted with Torx screws, more resistant.
Features:- Does not use additional plates.
- 2 height risers.
- Optimized eccenter or front plate more comfortable to use.
- Torx screws more resistant and with an optimized scheme for greater durability.
- Includes strap.
- Does not allow to apply brakes.
- DIN 4-10.
- Materials CrMo steel, 7075 aluminum, stainless steel and highly resistant plastic.
- Approximate weight per fixture 350 g.
Discover more products