fritschi Tecton 12 110mm

Features fritschi tecton 12 110mm

The Tecton renews the toe of the binding, in relation to the Vipec, making a more compact and secure block, through greater ease in fitting the toe thanks to a more solid stop, to an improved guide and a greater opening of the stops, and providing more security in the boot going forward when jumping backwards, since the bolts open more quickly when feeling the pressure on the toe.

On the other hand, the heel is modified in relation to the vipec since the fastening system goes from the entry bolts in the dynafit rear system to a usual clamp of most bindings, usually alpine, with pressure on the base back of the boot.

It combines parts of the Vipec Evo such as its renewed and safe toe cap with Low Tech system, with a heel with a usual alpine spring and that acts with pressure on the rear base of the boot.

Some important advantages of this binding should be highlighted compared to others with the Tech system:

• Lateral toe release. When the binding receives a strong blow on the side (depending on the DIN that we have set) the sides open as the track bindings act. The sides have an elasticity of 13 mm until final release.
• Adjustment of the toe release. It is regulated exactly the same as a track one both in the toe and in the heel, with the same DIN values of 5-12.
• You don't need to block the toe when ascending, it has a position that hardens the toe so that it doesn't jump with the gesture of walking if we go on half slopes or stumble, but it releases in case of strong falls or in the case of being caught by an avalanche while climbing.
• The tailpiece is mounted on a slider, so it maintains distance when flexing the ski without compromising release safety. It also allows a better flex of the ski improving driving. The heel counter also has up to 4mm stretch before vertical release.
• Putting the binding in ski mode is very simple, switching from ski mode to walk mode, and vice versa, on the fly, without having to remove the ski.
• Wide mounting scheme with range for various sizes (about 25mm range).

In addition to all these data we can say that the Tecton 12 binding has three raising positions, for maximum comfort on ascents and very easy to lift with the stick. They are recommended for skis with wide waists, we would say that for more than 67 mm.

Features:

• Safety outlet on the toecap as a heel counter.
• Din 5-12 in toe and heel.
• Can be personalized with a colored clip, which is not included with the fixing.
• Recommended for skis with a waist of more than 67 mm by the manufacturer, it is the minimum width of the binding.
• Includes 110 mm brake.
• Weight according to manufacturer 550 g/unit.

IMPORTANT NOTE: By manufacturer's recommendation, this mounting model is NOT compatible for design reasons with the F1 Tronic and Alien models. (not RS) from Scarpa and TLT 7 from Dynafit. It is recommended not to exceed DIN 9 in Atomic's Backland models to avoid deformation of the toe of the boot due to excessive frontal angulation.

Check the compatibility of your boot with this binding in the attached PDF.